Refurbished Gladiator
Refurbished Gladiator CAL_7606 Tumblers-Electroprolish Tumblers-Quantanium

Refurbished Gladiator Trimming System

$11,000.00

 

Trim Wet and Dry! All CenturionPro Trimming Machines Now Come All Inclusive with BOTH WET and DRY tumblers. Or… Do you only trim one way? Get all your tumblers as either WET or DRY! All Backed by a 5-Year Warranty.

Trims 30 lbs dry (150 lbs wet) per hour. Replaces 40-50 human trimmers.

What type of tumbler should you choose?

Upgrade to Quantanium to Achieve 40% Greater Trichome Preservation!

CenturionPro 5-Year Warranty Trim Wet and Dry with CenturionPro Trimmers

Out of stock

SKU: GR-001 Category:

Description

Refurbished Gladiator

The Gladiator is, hands down, one of our most impressive machines at CenturionPro Solutions. The new and refurbished Gladiator options are powerhouse machines providing class-leading power and processing capacity for commercial and industrial grow operations. Designed with your success in mind, The CenturionPro Gladiator industrial harvesting machine drastically increases your ROI by doing the work of 40-50 human trimmers – all without sacrificing quality!

Our refurbished Glads pack the punch of a new machine, but may have cosmetic damage such as a scratch or dent. The functionality of its D2 hardened steel blade and precise trim still supersede any industry standards. Our refurbished machines go through a rigorous quality check and receive a 56 Point Certification. Therefore, you’re receiving a practically brand new machine at a greatly reduced price! Any defective component is replaced with a new high-quality part. In addition, the machine comes with a 5-year hassle free warranty on all parts and labor.

The CenturionPro Gladiator is a total game changer and now you have the opportunity to purchase it at an unbeatable price.

To check the availability of our CenturionPro Gladiator Certified Reconditioned machines please call toll free 1-855-535-0558

*please note you will have to purchase leaf collector plug separately*

Trimmers

Input Voltage: 7 Amp – 110V NA

Dimensions: 30″ L x 25″ W x 28″ H

Weight: 150lbs

Tumbler Diameter: 6.5″

# of Tumblers: 2

Number of Replaced Workers: 40

Processing Capability: 30lbs dry or 150lbs wet

Cuts per Minutes: 75,000

Warranty: 10 years

Leaf Collector:

Input Voltage: 22 Amp – 220V NA

Dimensions: 19” L x 22” W x 23” H

Weight: 90lbs

Horse Power: 4 HP

Air Flow Capacity: 3000 CFM

Warranty: 3 years

Centurion Gladiator
CenturionPro Gladiator vs 15 Hand Trimmers

Instructional Videos

Time for a tune up? Get the most out of your trimmers production value!
See Videos

Additional information

Weight 138 lbs

Reviews

There are no reviews yet.

Be the first to review “Refurbished Gladiator Trimming System”

Your email address will not be published. Required fields are marked *

Why does CenturionPro Solutions offer a better price than other competitors?

We believe in setting honest prices for our customers. We have the best trimmers in the world, and top-of-the-class quality control and manufacturing efficiencies. This results in legions of happy customers, which in return gives us the purchasing power to buy premium parts in wholesale quantities. We pass our saving back to you, our valued customers.

Are your machines built to industrial standard?

We do not compromise quality for cost savings. All CenturionPro® Solutions machines are composed of the highest quality materials available in North America and each machine is put through a comprehensive quality control inspection. Pioneering the industry since 1997, gives us an advantage that cannot be matched by any other competitor.

How easy is it to clean?

Our machines can be taken apart and cleaned within 10-15 minutes. 4 screws to remove the top cover, pressure wash the machine and then you’re good to go. Our optional Quantanium coating is similar to a Teflon pan you would have at home which is even easier to clean. Just submerge in warm water, let soak and then wipe with a soft cloth. We recommend to clean every 4-6 hours of use, but it depends on your strain. We know the importance of down time during a harvest so we wanted to make this process extremely quick and easy.

What is the maintenance like?

We have 15 video tutorials on our website with how to fully service your machine. These step by step videos make it very easy to do everything that will be necessary to maintaining your machine. All parts can be ordered right through the website and will be delivered to you within days.

How long is the warranty?

We at CenturionPro Solutions offer a 10 year warranty with all of our new machines and a 5 year on refurbished machines. We only use the highest quality brand name parts sourced from North America in the build out of our machines. High quality components such as Baldor motors, Timken bearings and Toro cutting reels are some of the reasons why we offer the best warranty in the industry. Our machines are battle tested and have been put through the most rigorous “real life” conditions. As long as you follow the operational/maintenance instructions, your machine will not quit on you.

Do your machines trim wet or dry?

All CenturionPro trimming machines now come all inclusive with both wet and dry tumblers. You have a wet tumbler for wet trimming and a dry tumbler for dry trimming. This is a major benefit because you can purchase one machine and still have the capability to trim wet or dry flowers. Our dry tumblers have a smaller cutting surface than the wet. If you were to run dry product through a wet tumbler, you would have excess loss of flowers. Keeping the yield high is the biggest advantage to having a specific tumbler for both methods of harvesting, wet or dry.

How long does shipping take?

Any order placed for shipping to the U.S. will reach its destination within 1 – 3 business days.   Orders placed within Canada and Overseas take roughly 3 – 6 business days.

{"single_open":"true","transition_speed":"300"}

Used trimming machines cannot be returned for any reason. Any warranty issues arising on a used trimming machine, must be submitted directly to CenturionPro® Solutions.

Un-used trimming machines may be returned within 10 days of purchase in its original packaging. A 15% restocking fee will apply.34

CenturionPro® Solutions ships internationally and offers free and discreet delivery to anywhere in the USA on all purchases over $1000.

Your privacy is as important to us as it is to you and we take it very seriously. All shipments are packed in unmarked boxes and tracking numbers are also provided for your safety.

All North American orders will reach their destination in 1-3 business days and anywhere else in the world in 3-6 business days.

GMP refers to the Good Manufacturing Practice Regulations promulgated by the US Food and Drug Administration under the authority of the Federal Food, Drug, and Cosmetic Act (See Chapter IV for food, and Chapter V, Subchapters A, B, C, D, and E for drugs and devices.) These regulations, which have the force of law, require that manufacturers, processors, and packagers of drugs, medical devices, some food, and blood take proactive steps to ensure that their products are safe, pure, and effective. GMP regulations require a quality approach to manufacturing, enabling companies to minimize or eliminate instances of contamination, mixups, and errors. This in turn, protects the consumer from purchasing a product which is not effective or even dangerous. Failure of firms to comply with GMP regulations can result in very serious consequences including recall, seizure, fines, and jail time.

GMP regulations address issues including record keeping, personnel qualifications, sanitation, cleanliness, equipment verification, process validation, and complaint handling. Most GMP requirements are very general and open-ended, allowing each manufacturer to decide individually how to best implement the necessary controls. This provides much flexibility, but also requires that the manufacturer interpret the requirements in a manner which makes sense for each individual business.

GMP is also sometimes referred to as “cGMP”. The “c” stands for “current,” reminding manufacturers that they must employ technologies and systems which are up-to-date in order to comply with the regulation.