My Leaf Collector won’t turn on

by | Jan 15, 2018 | Leaf Collector |

How Can We Help?
< Back
You are here:
Print
Posted
Last Updated On
ByErin

It may be an electrical issue so begin by getting your Certified Electrician to confirm that your electrical components are working properly. Once given the thumbs up, ensure that your blower is getting the proper amount of amperage it needs to start. Sometimes the blowers need a bit more juice to start up and then it will level out to the specified requirements. For example, if your blower needs 15AMP, it may need 20AMP to fire up. You can also try pushing the black reset button down hard for 10 seconds, release, and then attempt to turn it on again.

Please note: These blowers are not made to have extension cords over 1ft long between the unit and the power source. You must also ensure that the gauge of the extension cord is AS thick or thicker than the cord supplied. If all this does not solve your problem then please contact us for further assistance.

Tags:
Table of Contents

GMP refers to the Good Manufacturing Practice Regulations promulgated by the US Food and Drug Administration under the authority of the Federal Food, Drug, and Cosmetic Act (See Chapter IV for food, and Chapter V, Subchapters A, B, C, D, and E for drugs and devices.) These regulations, which have the force of law, require that manufacturers, processors, and packagers of drugs, medical devices, some food, and blood take proactive steps to ensure that their products are safe, pure, and effective. GMP regulations require a quality approach to manufacturing, enabling companies to minimize or eliminate instances of contamination, mixups, and errors. This in turn, protects the consumer from purchasing a product which is not effective or even dangerous. Failure of firms to comply with GMP regulations can result in very serious consequences including recall, seizure, fines, and jail time.

GMP regulations address issues including record keeping, personnel qualifications, sanitation, cleanliness, equipment verification, process validation, and complaint handling. Most GMP requirements are very general and open-ended, allowing each manufacturer to decide individually how to best implement the necessary controls. This provides much flexibility, but also requires that the manufacturer interpret the requirements in a manner which makes sense for each individual business.

GMP is also sometimes referred to as “cGMP”. The “c” stands for “current,” reminding manufacturers that they must employ technologies and systems which are up-to-date in order to comply with the regulation.